Electro-Mechanical Technician
AI summary
Brites Management Services Limited is hiring an Electro-Mechanical Technician for a full-time role based in Lamu, Kenya. The position involves installing, maintaining, troubleshooting, and optimizing production machinery and facility equipment in an FMCG environment. The role offers a salary of KSh 50,000–55,000 and requires a diploma and 3–5 years of relevant experience.
- Full-time role based in Lamu, Kenya
- Salary KSh 50,000–55,000
- Diploma in Electromechanical Technology, Mechatronics, Electrical, Mechanical or Industrial Electronics required
- 3–5 years’ experience in high-volume manufacturing, preferably FMCG
- Hands-on work with PLCs, VFDs, motors, hydraulics, and control systems
- Focus on preventive maintenance, root cause analysis, and safety compliance
AI job guide
Use this guide to check salary signals, requirements, documents, application steps and safety before you apply.
AI salary guide
Source salary availableThe source lists KSh 50,000–55,000. Confirm the final pay, benefits, contract terms and allowances directly with the employer before accepting an offer.
Can you qualify for this role?
- Required3+ years of relevant experienceThe job post includes a minimum experience signal.
- RequiredEducation or certification mentioned in the postThe captured text mentions education, a diploma, certificate, or licence.
- PreferredPractical evidence in retail, factory, technologyThe tags and summary point to skills connected with this role.
- RequiredAvailability to work in Not specifiedThe vacancy is associated with this location.
- UnclearComfort with the Full Time contract termsConfirm hours, duration, probation and benefits at the original source.
Documents to prepare
- Likely requiredUpdated CV
- Role specificCover letter or short employer message
- OptionalProfessional references
- Role specificAcademic or professional certificates
- VerifyID or passport only after verifying the employer
Application tips for this job
- Place your strongest Electro-Mechanical Technician evidence in the first half of your CV.
- In your cover letter or employer message, connect your experience to Brites Management Services Limited and the role in Not specified.
- Add concrete examples related to retail, factory, technology, ideally with measurable outcomes or clear responsibilities.
- Follow the instructions from BrighterMonday Kenya; avoid sending documents to unofficial contacts or copied links.
- Confirm the deadline, interview location and employer contact before sharing personal documents.
Source and safety check
- BrighterMonday Kenya
- Original source link available
- Application method is clear
- Deadline not specified
- No major risk signal was detected in the captured text.
Never pay for interviews, shortlisting, medical checks, uniforms, or job placement. Confirm every application at the original source before sharing personal documents. Report suspicious listing.
Interview preparation
- What experience makes you a strong fit for this Electro-Mechanical Technician role in retail, factory?
- How have you handled responsibilities similar to those in this job post?
- Are you available to work in Not specified under the listed contract or schedule?
- Prepare examples with clear responsibilities, tools used and measurable outcomes.
- Review the source and research Brites Management Services Limited before the interview.
Ask what the first priorities will be in the role and how success will be measured.
Similar jobs to consider
Use AI to apply better
After confirming the original source, use Career Assistant to check role fit, tailor your CV and prepare a cover letter or employer message.
Original source description
ELECTRO-MECHANICAL TECHNICIAN
Brites Management Services Limited
Engineering & Technology
3 days ago
Easy apply
New
Rest of Kenya
Full Time
Retail, Fashion & FMCG
Confidential
Share link
Share on WhatsApp
Share on LinkedIn
Share on Facebook
Share on Twitter
Share via SMS
Job summary
The Electro-Mechanical Technician is responsible for performing skilled electrical, electronic, hydraulic, and mechanical support to maintain, troubleshoot, and optimize production machinery, facility equipment, and building systems. This role plays a vital part in ensuring maximum equipment uptime, operational efficiency, and strict adherence to environmental health and safety standards in both light and heavy industrial environments.
Min Qualification:
Diploma
Experience
- Level:
- Mid level
- Length:
- 3 years
- Language Requirement:
- English
- Working Hours:
- Full Time - 8 to 5
- Applicant
- Location:
- Kenya
- Job descriptions &
- in a high-volume manufacturing environment (FMCG, preferred)
- ·
- Proficiency in
- electrical diagnostics and mechanical assembly
- ·
- Familiarity with
- PLCs (e.g., Allen-Bradley, Siemens, Delta), motor controllers, and sensors
- ·
- Ability to read
- and interpret wiring diagrams and mechanical schematics
- ·
- Skilled in using
- testing equipment and mechanical hand tools
- ·
- Basic welding
- ability on Stainless steel, Mild steel and cast iron
- ·
- Knowledge of
- safety procedures and basic electrical code compliance
- HOW TO APPLY
- · If you meet the above qualifications,
- skills and
- share CV on recruitment@britesmanagement.com
- · Interviews will be carried out on a
- rolling basis until the position is filled.
- · Only the shortlisted candidates will be
- contacted.
- Log In and Apply
- Important safety tips
- Do not make any payment without confirming with the BrighterMonday Customer Support Team.
- If you think this advert is not genuine, please report it via the Report Job link below.
- Report Job
Requirements
- JOB TITLE
- ELECTRO-MECHANICAL TECHNICIAN
- NATURE OF JOB
- FULL TIME
- INDUSTRY
- FMCG
- SALARY
- KSHS.50,000-55,000
- JOB LOCATION
- LAMU
- DUTIES AND
Responsibilities
- Installation,
- Maintenance & Optimization
- ·
- System
- Installation:
- Install, assemble, and calibrate complex
- electro-mechanical systems, including AC/DC motors, variable frequency drives
- (VFDs), sensors, actuators, and control units.
- ·
- Preventive
- Maintenance (PM):
- Execute scheduled PM routines to identify wear and tear, conduct precision
- adjustments, and replace aging components to minimize unscheduled downtime.
- ·
- Mechanical
- Alignment:
- Service, align, and replace power
- transmission components such as gearboxes, sprockets, chains, belts, bearings,
- and pneumatic/hydraulic actuators.
- ·
- Upgrades
- & Retrofits:
- Assist in executing system hardware and
- software upgrades to enhance machinery performance, safety, and operational
- capacity.
- Diagnostics & Troubleshooting
- ·
- Root
- Cause Analysis:
- Rapidly diagnose and resolve complex
- mechanical, electrical, electronic, and hydraulic failures on production
- machinery.
- ·
- PLC
- & Control Systems:
- Interact with Programmable Logic Controllers (PLCs) and automated control
- software to troubleshoot faults, monitor I/O status, adjust parameters, and
- reset systems.
- ·
- Technical
- Blueprinting:
- Interpret complex electrical schematics,
- mechanical drawings, ladder logic, hydraulic circuit diagrams, and structural
- blueprints.
- ·
- Precision
- Measurement:
- Proficiently use diagnostic equipment
- (e.g., digital multimeters, oscilloscopes) and precision tools (e.g., calipers,
- micrometers, dial indicators) to assess tolerances and electrical integrity.
- Testing, Quality & Compliance
- ·
- Calibration
- & Testing:
- Perform functional testing and precision
- calibrations on equipment post-repair to verify full operational readiness and
- accuracy.
- ·
- Safety
- & Regulatory Compliance:
- Ensure all maintenance activities conform to local regulations (OSHA, NEC, NFPA
- 70E, or local equivalents), Lockout/Tagout (LOTO) protocols, and
- machine-guarding safety standards.
- ·
- Workplace
- Standards:
- Maintain a clean, organized, and safe
- working environment (5S principles) in maintenance areas and across the factory
- floor.
- Documentation & Collaboration
- ·
- Logs
- & Records:
- Accurately log maintenance activities,
- work orders, spare part usages, equipment history, and root-cause findings
- within the Maintenance Management System (CMMS).
- ·
- Cross-Functional
- Support:
- Collaborate effectively with electrical
- engineers, mechanical designers, external contractors, and operations personnel
- during new machinery installations and integration projects.
- KEY REQUIREMENT SKILLS AND QUALIFICATION
- ·
- Diploma in
- Electromechanical Technology, Mechatronics, Electrical, Mechanical or
- Industrial Electronics
- ·
- 3 to 5 years of