Electrical Test Engineer
AI job insight
SunCulture Kenya Ltd is hiring an Electrical Test Engineer in Nanyuki to test and validate hardware and firmware for solar-powered irrigation products. The role supports research, product design and field teams through prototype testing, circuit diagnostics, fault investigation and technical documentation.
- Full-time role testing electrical hardware and firmware for solar irrigation products.
- At least two years of experience and a relevant bachelor's degree are required.
- Develops and executes test plans for prototype and commercial systems.
Similar jobs
More roles you may want to review before you leave.AI summary
SunCulture Kenya Ltd is hiring an Electrical Test Engineer in Nanyuki to test and validate hardware and firmware for solar-powered irrigation products. The role supports research, product design and field teams through prototype testing, circuit diagnostics, fault investigation and technical documentation.
- Full-time role testing electrical hardware and firmware for solar irrigation products.
- At least two years of experience and a relevant bachelor's degree are required.
- Develops and executes test plans for prototype and commercial systems.
- Collaborates with R&D and product design teams on validation and debugging.
- Salary and application deadline are not specified.
AI job guide
Use this guide to check salary signals, requirements, documents, application steps and safety before you apply.
AI salary guide
Source salary availableThe source lists SALARY AND WORK ARRANGEMENT. Confirm the final pay, benefits, contract terms and allowances directly with the employer before accepting an offer.
Can you qualify for this role?
- Required2+ years of relevant experienceThe job post includes a minimum experience signal.
- RequiredEducation or certification mentioned in the postThe captured text mentions education, a diploma, certificate, or licence.
- PreferredPractical evidence in Hardware testing, Firmware validation, R&DThe tags and summary point to skills connected with this role.
- RequiredAvailability to work in NanyukiThe vacancy is associated with this location.
- UnclearComfort with the Full Time contract termsConfirm hours, duration, probation and benefits at the original source.
Documents to prepare
- Likely requiredUpdated CV
- Role specificCover letter or short employer message
- OptionalProfessional references
- Role specificAcademic or professional certificates
- VerifyLicence, permit or professional registration
- VerifyID or passport only after verifying the employer
Application tips for this job
- Place your strongest Electrical Test Engineer evidence in the first half of your CV.
- In your cover letter or employer message, connect your experience to SunCulture Kenya Ltd and the role in Nanyuki.
- Add concrete examples related to Hardware testing, Firmware validation, R&D, ideally with measurable outcomes or clear responsibilities.
- Follow the instructions from JobOpenings.co.ke; avoid sending documents to unofficial contacts or copied links.
- Confirm the deadline, interview location and employer contact before sharing personal documents.
- Prepare a polite question about pay, benefits and contract terms for later interview stages.
Source and safety check
- JobOpenings.co.ke
- Original source link available
- Application method is clear
- Deadline not specified
- No major risk signal was detected in the captured text.
Never pay for interviews, shortlisting, medical checks, uniforms, or job placement. Confirm every application at the original source before sharing personal documents. Report suspicious listing.
Interview preparation
- What experience makes you a strong fit for this Electrical Test Engineer role in Hardware testing, Firmware validation?
- How have you handled responsibilities similar to those in this job post?
- Are you available to work in Nanyuki under the listed contract or schedule?
- Prepare examples with clear responsibilities, tools used and measurable outcomes.
- Review the source and research SunCulture Kenya Ltd before the interview.
Ask what the first priorities will be in the role and how success will be measured.
Similar jobs to consider
Use AI to apply better
After confirming the original source, use Career Assistant to check role fit, tailor your CV and prepare a cover letter or employer message.
Original source description
Job Title: Electrical Test Engineer
Company: SunCulture Kenya Ltd
Location: Nanyuki, Kenya
Job Type: Full-Time
Job Category: Engineering / Technical
Minimum Qualification: Bachelor's Degree in Electrical, Electronics or Mechatronics Engineering
Required Experience: At least 2 years
Application Deadline: Not specified
Salary: Not specified
JOB OVERVIEW
SunCulture Kenya Ltd is seeking an Electrical Test Engineer to support the testing, troubleshooting and validation of electrical hardware and firmware used in its solar-powered irrigation solutions.
The successful candidate will work with research and development teams to test prototypes, identify technical faults, verify system performance and ensure that products meet the required standards before commercial deployment.
The role involves testing embedded hardware, microcontrollers, solar water pumps and power systems. The engineer will also maintain technical documentation, investigate hardware and firmware defects, and provide technical support during field trials and product launches.
This opportunity is suitable for an engineering professional with practical experience in electronics testing, embedded systems, circuit diagnostics and solar energy technology.
ABOUT SUNCULTURE KENYA LTD
SunCulture Kenya Ltd is an agricultural technology company focused on helping smallholder farmers improve crop yields and quality through affordable solar-powered irrigation solutions.
Since selling its first kit in 2013, the company has continued to develop technologies intended to make solar irrigation more accessible to farmers across Africa.
The Electrical Test Engineer will contribute to the testing and improvement of the company's hardware and firmware systems, helping ensure that its products operate reliably in real-world farming environments.
KEY RESPONSIBILITIES
- The Electrical Test Engineer will perform the following duties:
- 1. Test Planning and Execution
- Develop, execute and document comprehensive test plans for prototype and commercially deployed hardware and firmware systems.
- 2. Hardware and Firmware Validation
- Work with research and development and product design teams to test, debug and validate control systems under real-world operating conditions.
- 3. Circuit Testing and Diagnostics
- Perform hardware probing, circuit board testing and firmware flashing on microcontrollers, including ESP32, Atmel AVR and NRF series devices.
- 4. Use of Testing Equipment
- Use diagnostic tools, multimeters and oscilloscopes to investigate electrical faults and assess system performance.
- 5. Solar Pump and Power System Testing
- Conduct water flow, power consumption and efficiency tests on solar water pumps and power systems to verify that they meet performance requirements.
- 6. Fault Identification and Troubleshooting
- Identify hardware defects and firmware bugs, investigate their root causes and maintain prioritized issue-tracking records and release notes.
- 7. Technical Documentation
- Maintain accurate technical documentation, changelogs and device history records throughout pilot testing and production.
- 8. Reporting and Communication
- Prepare clear technical reports and presentations to communicate testing results and findings to engineering teams and other stakeholders.
- 9. Field Support
- Provide advanced technical support during field pilot programmes and assist with resolving product-related challenges.
- 10. Training and Knowledge Transfer
- Support operations and customer support teams through technical training and knowledge sharing during commercial product launches.
- QUALIFICATIONS AND REQUIREMENTS
- Applicants should meet the following academic, technical and professional requirements.
- Academic Qualifications
- A bachelor's degree in any of the following disciplines:
- Electrical Engineering
- Electronics Engineering
- Mechatronics Engineering
- A master's degree is preferred but is not stated as mandatory.
- Professional Experience
- Applicants should have at least two years of hands-on experience testing embedded hardware and firmware systems.
- Experience working in the off-grid solar energy or solar water pumping sector is strongly preferred.
- Technical Skills and Knowledge
- Candidates should demonstrate the following technical competencies:
- Ability to read printed circuit board (PCB) schematics.
- Practical experience probing circuits and testing electronic components.
- Proficiency in using oscilloscopes and multimeters.
- Experience testing embedded hardware and firmware.
- Knowledge of microcontrollers such as ESP32, Atmel AVR and NRF51/52.
- Ability to troubleshoot and document firmware bugs.
- Understanding of solar energy systems and DC/DC converter topologies.
- Knowledge of off-grid solar hardware design considerations.
- Experience with hardware testing, debugging and performance validation.
- Experience using Eagle CAD is an added advantage.
- Additional Requirements
- An EPRA T2 or T3 class licence is an advantage.
- Strong analytical and root-cause troubleshooting skills.
- Ability to prioritize tasks and manage technical issues in a fast-paced environment.
- Excellent written and spoken English communication skills.
- Ability to explain technical findings to stakeholders without technical backgrounds.
- Familiarity with emerging artificial intelligence tools, machine learning applications or AI-assisted research and testing methods is an added advantage.
- KEY SKILLS AND COMPETENCIES
- The successful candidate should demonstrate the following skills:
- Electrical and electronic testing
- Embedded systems testing
- Firmware debugging and validation
- PCB schematic interpretation
- Circuit probing and fault diagnosis
- Oscilloscope and multimeter operation
- Solar energy systems testing
- Solar water pump performance evaluation
- Root-cause analysis
- Technical documentation and reporting
- Test planning and execution
- Analytical thinking and problem-solving
- Task prioritization
- Technical communication and teamwork
- IDEAL CANDIDATE
- The ideal candidate is an electrical, electronics or mechatronics engineering professional with practical experience testing embedded hardware and firmware.
- They should be comfortable working with microcontrollers, electronic circuits and diagnostic equipment to identify faults and improve product reliability.
- Candidates with experience in solar irrigation, off-grid power systems and solar water pumping technologies may be particularly well suited to this position.
- The successful applicant should also be detail-oriented, analytical and capable of documenting test results clearly while collaborating with engineering, operations and support teams.
- Knowledge of AI-assisted testing and research methods would provide an additional advantage.
- SALARY AND WORK ARRANGEMENT
- Job Type: Full-time
- Location: Nanyuki, Kenya
- Salary: Not specified.
- Other employment benefits and working arrangements have not been provided in the vacancy announcement.
- HOW TO APPLY
- Interested and qualified candidates should submit their applications through the SunCulture Kenya Ltd recruitment platform.
- Application Portal:
- hrconnect.myadrenalin.com
- Applicants should review the official vacancy listing and provide the information and supporting documents requested through the recruitment portal.
- Before applying, ensure that your CV highlights your engineering qualifications, experience in embedded systems testing, familiarity with microcontrollers and practical knowledge of solar power systems.
- Candidates should also emphasize their experience with circuit diagnostics, firmware troubleshooting, test documentation and root-cause analysis.
- Application Deadline:
- Not specified.
- JOB SUMMARY
- Job Title: Electrical Test Engineer
- Employer: SunCulture Kenya Ltd
- Location: Nanyuki, Kenya
- Employment Type: Full-Time
- Job Category: Engineering / Technical
- Minimum Qualification: Bachelor's Degree in Electrical, Electronics or Mechatronics Engineering
- Required Experience: At least 2 years
- Master's Degree: Preferred
- Technical Focus: Embedded hardware, firmware and solar power systems
- Preferred Industry Experience: Off-grid solar energy and solar water pumping
- Additional Advantage: EPRA T2/T3 licence
- Salary: Not specified
- Application Method: Online application
- Application Portal: hrconnect.myadrenalin.com
- Deadline: Not specified
- FREQUENTLY ASKED QUESTIONS
- 1. Where is the Electrical Test Engineer job located?
- The position is based in Nanyuki, Kenya.
- 2. Which academic qualifications are required?
- Applicants need a bachelor's degree in Electrical Engineering, Electronics Engineering or Mechatronics Engineering. A master's degree is preferred.
- 3. How much experience is required?
- Candidates should have at least two years of hands-on experience testing embedded hardware and firmware systems.
- 4. Is solar energy experience required?
- Experience in off-grid solar energy or solar water pumping is strongly preferred.
- 5. Which microcontrollers should applicants know?
- The vacancy mentions ESP32, Atmel AVR and NRF series microcontrollers, including NRF51/52.
- 6. Is an EPRA licence mandatory?
- An EPRA T2 or T3 class licence is listed as an advantage rather than a mandatory requirement.
- 7. How can I apply for the position?
- Applications should be submitted through the SunCulture recruitment platform at hrconnect.myadrenalin.com.
- 8. Is the salary specified?
- No. The salary is not specified in the available vacancy announcement.
- 9. What additional skills could improve an applicant's chances?
- Experience with Eagle CAD, AI tools, machine learning applications and AI-assisted research or testing methods would be an advantage.
- APPLICATION TIPS
- Tailor your CV to highlight practical engineering experience rather than listing academic qualifications alone.
- Include relevant projects involving embedded systems, PCB testing, firmware debugging, solar energy systems and electrical diagnostics.
- Where possible, describe measurable achievements, such as improving testing accuracy, identifying recurring hardware faults, reducing troubleshooting time or validating product performance.
- Highlight your experience using oscilloscopes, multimeters and microcontroller development tools. If you have worked with solar water pumps or off-grid power systems, make that experience easy for the recruiter to identify.
- Review your application carefully and submit it through the recruitment portal.
- For more job description visit: jobopenings.co.ke
- Read full description
- Application & Safety Advice
- Key tips for applying to
- SunCulture Kenya Ltd
- 1. Zero Fee Policy
- Job Openings Kenya and legitimate employers never ask for application or medical fees. Report any suspicious requests immediately.
- 2. Tailored Application
- Customize your CV to highlight relevant skills for this specific role at
- SunCulture Kenya Ltd
- before submitting.
- Detecting location...
- Quick Info
- Type
- Job
- Company
- SunCulture Kenya Ltd
- Nanyuki
- Rolling Basis
- Open until filled
- Ready to Apply?
- Don't miss this opportunity.
- Apply Online
- I've Applied
- Get Help Applying
- AI Cover Letter
- Interview Prep
